Canonical page: https://mixerai.org/en/knowledge/compare/kling-2-1-vs-kling-2-6-motion/ [Mixer AI](https://mixerai.org/) › [Knowledge Base](https://mixerai.org/en/knowledge/) › [Comparison](https://mixerai.org/en/knowledge/compare/) › Kling 2.1 vs Kling 2.6 Motion Control: technical and visual comparison # Kling 2.1 vs Kling 2.6 Motion Control: technical and visual comparison Both models are available in the current Mixer AI catalog, but they solve different jobs within the same media type. This page therefore does not label one as universally better: the table shows compatible inputs, limits and pricing, while the visual section separates valid A/B checks from different workflow stages. [Try it on Mixer AI](https://mixerai.org/?dl=kb_kling-2-1-vs-kling-2-6-motion#/canvas) ## Key differences Kling 2.1: Turn a photo into a short moving shot, or start from text with Master. Kling 2.6 Motion Control: A photo supplies the character; a video supplies the performance, from dance to conversational gestures. Start with the specification table: it reflects current modes, input media, duration, resolution, aspect ratios and a normalized price where a fair comparison is possible. ## Specifications | Spec | Kling 2.1 | Kling 2.6 Motion Control | Model variants | Standard / Pro / Master | Motion Control 2.6 | Generation modes | from text / from first and last frames | Motion Control | First frame | Yes | No | Last frame | Yes | No | Input photos | No | 1, required | Input videos | No | 1, required | Input video length | No | 3–30 s | Minimum duration | 5 s | 3 s | Maximum duration | 10 s | 30 s | Resolutions | No separate selector | 720p / 1080p | Aspect ratios | 9:16 / 16:9 / 1:1 | Follows the input | Prompt limit | 5,000 characters | 2,500 characters | Price (different settings) | 103 coins · 5 s · No separate selector | 41 coins · 5 s · 720p There is no shared resolution for a direct price comparison, so each price includes its setting and is not highlighted as cheaper. ## What to compare visually Do not force tools with different jobs into the same test. First compare the inputs each one accepts and the output it is meant to produce. If they share a workflow, run an A/B test on the same source; otherwise judge each at its own stage: generation, Motion Control, avatar creation or upscaling. ## What to inspect with Kling 2.1 Turn a photo into a short moving shot, or start from text with Master. - Standard: one photo. Pro: one or two photos. Master: text or one photo. - Choose 5 or 10 seconds. A separate negative-prompt field is available. - Standard and Pro cannot start from text alone. - Complex hand movements and sharp turns need close inspection. ## What to inspect with Kling 2.6 Motion Control A photo supplies the character; a video supplies the performance, from dance to conversational gestures. - One photo and one video as inputs; 720p or 1080p output. - Video orientation supports up to 30 seconds; image orientation up to 10 seconds. - A written prompt cannot replace the required motion video. - Occluded limbs, sharp turns and movement outside the frame can transfer incorrectly. ## How to run a fair comparison - Identify the workflow stage first: create new media, transfer motion, make a talking avatar, or improve an existing file. - Compare specifications only where they mean the same thing: accepted inputs, limits, available resolution and the real price of the needed mode. - If a shared workflow exists, use the same source. If it does not, do not infer visual quality from non-equivalent outputs. - Tools for different stages can be used sequentially rather than as substitutes. ## What we compare [ Kling 2.1 Turn a photo into a short moving shot, or start from text with Master. ](https://mixerai.org/en/knowledge/video/kling-2-1/)[ Kling 2.6 Motion Control A photo supplies the character; a video supplies the performance, from dance to conversational gestures. ](https://mixerai.org/en/knowledge/video/kling-2-6-motion/) ## FAQ How should I compare Kling 2.1 and Kling 2.6 Motion Control fairly? Compare purpose and inputs first. Test any shared workflow on the same source; evaluate different workflows separately by output quality, constraints and the price of that stage. Are both models available in Mixer AI? Yes. This page is generated only for models in the current public Mixer AI catalog; if a model leaves the catalog, the automated comparison must stop passing validation. Which model is better? There is no universal answer. First eliminate a model that cannot accept the input, duration, resolution or format you need, then compare outputs on your own scene. The table highlights only measurable advantages in individual specifications. ## See also [Kling 2.6 Motion Control vs Kling 3.0 Motion Control: model comparison→](https://mixerai.org/en/knowledge/compare/kling-2-6-motion-vs-kling-3-0-motion/)[Veo 3.1 vs Kling 2.1: technical and visual comparison→](https://mixerai.org/en/knowledge/compare/veo-3-1-vs-kling-2-1/)[Veo 3.1 vs Kling 2.6 Motion Control: technical and visual comparison→](https://mixerai.org/en/knowledge/compare/veo-3-1-vs-kling-2-6-motion/)[Kling 3.0 vs Kling 2.1: technical and visual comparison→](https://mixerai.org/en/knowledge/compare/kling-3-0-vs-kling-2-1/) [Try it on Mixer AI](https://mixerai.org/?dl=kb_kling-2-1-vs-kling-2-6-motion#/canvas)